|
Adequately prepare the surface where the decal is to be installed. The
surface must be clean and free of all dirt, waxes, and sealers.
The decal and the surface of the vehicle must be a minimum of 50 degrees F.
and no warmer than 85 degrees F. If the area is not hot enough,
preheat with a hairdryer. It is best not to install in direct
sunlight or humid conditions.
All of our decals are designed to be installed on the outside of the
vehicle.
1. After cleaning the surface
thoroughly, use a decal squeegee (a plastic credit card or a similar
object works) to rub the decal on a flat surface to make sure it is flat.
2. Gently peel the backing off.
3. Slowly apply the decal with the sticky side to the surface.
4. Rub the decal with the squeegee until the whole decal is firmly
pressed against the surface.
5. Gently peel off the tape from the surface.
If you still have any questions, Email
Us
|